最新到货 维蒂室外壁挂电源柜EPC4860/1800-FB32，室外一体化电源柜
EPC4860/1800-FA2:-10℃~+45℃
EPC4860/1800-FB2:-40℃~+45℃
储存温度-40℃~+70℃
相对湿度5%RH~100%RH
海拔≤2000m（超过要求的降额）
污染等级III
没有导电灰尘或腐蚀性气体，也没有爆炸风险
交流输入
输入标准TN系统，单相三线
额定输入相电压220Vac
输入电压范围85Vac~300Vac
输入交流电压频率45Hz~65Hz
*输入电流≤30A（含10A用户插座）
功率因数≥0.99
过电压类别III
直流输出
输出直流电压范围为43.2Vdc~57.6Vdc
输出直流电压54.0Vdc
输出直流电流
0-60A（输出电压54V）
在机柜中安装电池时：用户负载输出为0-50A，电池充电电流为0-10A
在机柜内安装设备时：当设备的热输出达到200W时，用户负载*输出40A
效率≥90%4第1章概述
EPC4860/1800-FA2型
参数类别参数名称说明
机械参数
尺寸（宽×深×高）
机柜610mm×290mm×700mm（不含底座）
机柜空间
安装铅酸蓄电池440mm×180mm×430mm
安装19英寸设备485mm×180mm×365mm
重量（kg）
机柜≤30（不包括电池组、整流模块和安装组件）
整流模块≤2.5
主要特点
整流器模块
整流模块的功率因数值达到0.99，效率超过90%。
交流输入电压的正常工作范围宽至85Vac~300Vac。当输入电压在85Vac和175Vac之间时，整流器模块切换到有限的功率输出。
整流器模块采用无损热插拔技术，即插即用。更换时间小于1分钟。
系统
全面的电池管理。具备低压电池保护功能，可进行温度补偿、自动调压、无级限流、电池容量计算、在线电池测试
试用功能。
可以实现远程监控和无人操作。
完美的交流和直流侧防雷设计。
完善的故障保护和报警功能。
防护指标：防水符合IP*5的要求，防尘符合IP4*的要求。
采用整流模块休眠技术，系统具有节能功能。
系统效率超过90%。
EPC4860/1800-FA2:-10℃~+45℃
EPC4860/1800-FB2:-40℃~+45℃
Storage temperature -40 ℃~+70 ℃
Relative humidity 5% RH~100% RH
Altitude ≤ 2000m (exceeding the required derating)
Pollution level III
There is no conductive dust or corrosive gas, and there is no risk of explosion
AC input
Input standard TN system, single-phase three wire
Rated input phase voltage 220Vac
Input voltage range 85Vac~300Vac
Input AC voltage frequency 45Hz~65Hz
Input current ≤ 30A (including 10A user socket)
Power factor ≥ 0.99
Overvoltage category III
DC output
The output DC voltage range is 43.2Vdc~57.6Vdc
Output DC voltage 54.0Vdc
Output DC current
0-60A (output voltage 54V)
When installing batteries in the cabinet: the user load output is 0-50A, and the battery charging current is 0-10A
When installing equipment in the cabinet: When the thermal output of the equipment reaches 200W, the user load * output 40A
Efficiency ≥ 90% 4 Chapter 1 Overview
EPC4860/1800-FA2 type
Parameter Category Parameter Name Description
Mechanical parameters
Size (width × deep × High)
Cabinet 610mm × 290mm × 700mm (excluding base)
Cabinet space
Install lead-acid battery 440mm × 180mm × 430mm
Installing a 19 inch device 485mm × 180mm × 365mm
Weight (kg)
Cabinet ≤ 30 (excluding battery pack, rectifier module, and installation components)
Rectifier module ≤ 2.5
main features
Rectifier module
The power factor value of the rectifier module reaches 0.99, and the efficiency exceeds 90%.
The normal operating range of AC input voltage is as wide as 85Vac~300Vac. When the input voltage is between 85Vac and 175Vac, the rectifier module switches to a limited power output.
The rectifier module adopts non-destructive hot swapping technology, which is plug and play. The replacement time is less than 1 minute.
system
Comprehensive battery management. Equipped with low-voltage battery protection function, capable of temperature compensation, automatic voltage regulation, stepless current limiting, battery capacity calculation, and online battery testing
Trial function.
It can achieve remote monitoring and unmanned operation.
Perfect lightning protection design for both AC and DC sides.
Complete fault protection and alarm functions.
Protection indicators: Waterproof meets the requirements of IP * 5, and dustproof meets the requirements of IP4
? The rectifier module sleep technology is adopted, and the system has energy-saving function.
? The system efficiency exceeds 90%.
