18611994737

首页 >> 产品中心 >>华为室外柜 >> 中兴ZXDU68W001(-48V250A) 室外柜,5G通信基站电源柜
详细说明

中兴ZXDU68W001(-48V250A) 室外柜,5G通信基站电源柜

暂无价格
  • 产品说明
  • 产品参数

 中兴ZXDU68W201通信电源中兴户外48v200A户外5G基站电源
交流配电三相五线制(L1/L2/L3/N/PE)
额定输入电压线电压380VAC,相电压220VAC
电压范围45hz-66hz
输入电流100A
输入功率因数≥0.99满载
家里的两个和一个辅助输出是单相三孔16A维修插座;另一个是单相33A交流辅助输出,主要为热交换器的加热器和电池加热板供电
直流配电-42vdc~-58vdc可调
输出电流200A全配置
负载输出:6个通道,每个通道的容量为6A-63A
电池输入标准配置:2个电池输入,100A空气开关
额定输入满负荷时效率≥90%
保护功能的标准配置;一次掉电负载(5路),两次掉电负荷(1路),可以根据用户需求配置第一和第二掉电负载电路的数量
底盘尺寸和重量
组合柜1700mm*600mm*600
分体柜整流柜900*600*600
电池柜900*600*600
组合柜的完整配置大于200kg,不包括电池组
分体柜整装整流柜>130kg蓄电池柜70kg
随着运营商基站数量的增加,其网络能耗也在迅速增加。随着环保理念的深入,土地收购变得越来越困难,土地租赁成本也飙升。随着劳动力成本的增加,通信设备必须提高人机友好性,以降低工程安装和日常维护成本。为了满足用户全面降低TCO的要求,中兴通讯开发了ZXDU68S301系列高效电源。
产品特点
ZXDU68 S301是一款高效-48V室内组合动力系统,标准配置18kW。
包含更多样的外部接口:输入和输出干触点、RJ45、RS232、RS485、USB,并可根据现场环境灵活联网。
该系统采用了效率高达96%的整流器,比传统电源更节能,减少了二氧化碳排放。
功率密度更高,设计用于前接线前的维护,可配备4组电池,减少了占地空间和维护空间。
监控单元采用彩色屏幕,视觉效果更好,同时采用人性化九宫格设计,操作更方便。
功率密度高,节省高达50%的占地面积,减少80~300VAC的场地租赁费用,输入电压范围宽,电池寿命提高-40~+70℃的工作温度范围,现场适应性强,节省温控设备成本,使用速率整流器,与传统电源相比,可节省高达10%的电力。丰富的网络接口可以提供干触点、RJ45、RS232和RS485,并支持USB接口快速启动和监控存储容量扩展。规格参数:
产品版本号:zxdu68 b201
整流器:zxd3000,配置4台
监测单元:CSU500a
输入方式:单相双输入,手动切换
可变输入电压范围:80 V至300 V
输入电压频率:50 Hz/60 Hz
输入电流:72a
(2) 热力设计技术
对于室外电源,如果采用集成机柜,电源和电池隔间都需要进行散热和加热处理,机柜内部的温度控制已成为技术难点。高低温控制技术是一项复杂的技术。高温控制可以使用空调、热交换器或风扇,而低温控制则使用加热器等技术。然而,空调、热交换器和加热器的电源是一个主要问题。一般来说,直流供电的空调和加热器设备相对较少,使用交流电源。在交流停电或其他交流故障的情况下,空调和加热器无法正常工作,机柜内的温度偏离电池的正常工作温度,从而影响电池的使用寿命。目前行业的趋势是,供电隔间通常配备直流供电的热交换器或风扇进行散热,使用交流供电的加热管进行加热;电池舱采用风扇冷却和加热膜加热来控制电池舱的温度。

ZTE ZXDU68W201 Communication Power Supply ZTE Outdoor 48v200A Outdoor 5G Base Station Power Supply
AC distribution three-phase five wire system (L1/L2/L3/N/PE)
Rated input voltage line voltage 380VAC, phase voltage 220VAC
Voltage range 45hz-66hz
Input current 100A
Input power factor ≥ 0.99 Full load
Two and one auxiliary outputs at home are single-phase three hole 16A maintenance sockets; The other one is a single-phase 33A AC auxiliary output, mainly supplying power to the heater of the heat exchanger and the battery heating plate
DC distribution -42vdc~-58vdc adjustable
Output current 200A full configuration
Load output: 6 channels, each with a capacity of 6A-63A
Standard configuration for battery input: 2 battery inputs, 100A air switch
Efficiency ≥ 90% at rated input full load
Standard configuration of protection functions; Once powered off load (5 circuits), twice powered off load (1 circuit), the number of first and second powered off load circuits can be configured according to user needs
Chassis size and weight
Combination cabinet 1700mm * 600mm * 600
Split cabinet rectifier cabinet 900 * 600 * 600
Battery cabinet 900 * 600 * 600
The full configuration of the combined cabinet is greater than 200kg, excluding the battery pack
Split cabinet full configuration rectifier cabinet > 130kg battery cabinet 70kg
With the increase in the number of base stations for operators, their network energy consumption is rapidly increasing. The acquisition of sites has become increasingly difficult with the deepening of environmental protection concepts, and the cost of land leasing has also skyrocketed. With the increasing cost of labor, communication equipment must improve human-machine friendliness to reduce engineering installation and daily maintenance costs. To meet the requirements of users to comprehensively reduce TCO, ZTE has developed the ZXDU68S301 series of high-efficiency power supplies.
Product characteristics
ZXDU68 S301 is a high-efficiency -48V indoor combination power system with a standard configuration of 18kW.
Contains more diverse external interfaces: input and output dry contacts, RJ45, RS232, RS485, USB, and can be flexibly networked according to the on-site environment.
The system adopts a rectifier with an efficiency of up to 96%, which is more energy-efficient than traditional power sources and reduces CO2 emissions.
Higher power density, designed for maintenance before front wiring, and can be equipped with 4 sets of batteries, reducing floor space and maintenance space.
The monitoring unit adopts a color screen for better visual effect, while using a humanized nine palace grid design for more convenient operation.
High power density, saving up to 50% of floor space, reducing site rental expenses by 80~300VAC, wide input voltage range, improving battery life -40~+70 ℃ working temperature range, stronger adaptability in the field, saving cost of temperature control equipment, using rate rectifiers, saving up to 10% electricity compared to traditional power sources. Rich network interfaces can provide dry contacts, RJ45, RS232, and RS485, And it supports USB interface for quick start and monitoring storage capacity expansion. Specification parameters:
Product version number: zxdu68 b201
Rectifier: zxd3000, configured with 4 units
Monitoring unit: CSU500a
Input mode: single-phase dual input, manual switching
Fluctuatible input voltage range: 80 V to 300 V
Input voltage frequency: 50 Hz/60 Hz
Input current: 72a
(2) Thermal design technology
For outdoor power supply, if an integrated cabinet is adopted, both the power and battery compartments need to undergo heat dissipation and heating treatment, and temperature control inside the cabinet has become a technical difficulty. High and low temperature control technology is a complex technology. High temperature control can use air conditioning, heat exchangers, or fans, while low temperature control uses technologies such as heaters. However, the power supply of air conditioning, heat exchangers, and heaters is a major issue. Generally speaking, there are relatively few DC powered air conditioning and heater equipment, and AC power supply is used. In the event of an AC power outage or other AC faults, the air conditioning and heater cannot function properly, and the temperature inside the cabinet deviates from the normal working temperature of the battery, which affects the service life of the battery. The current trend in the industry is that the power supply compartment is generally equipped with DC powered heat exchangers or fans for heat dissipation, and AC powered heating tubes are used for heating; The battery compartment adopts fan cooling and heating film heating to control the temperature of the battery compartment.

 中兴ZXDU68W201通信电源中兴户外48v200A户外5G基站电源
交流配电三相五线制(L1/L2/L3/N/PE)
额定输入电压线电压380VAC,相电压220VAC
电压范围45hz-66hz
输入电流100A
输入功率因数≥0.99满载
家里的两个和一个辅助输出是单相三孔16A维修插座;另一个是单相33A交流辅助输出,主要为热交换器的加热器和电池加热板供电
直流配电-42vdc~-58vdc可调
输出电流200A全配置
负载输出:6个通道,每个通道的容量为6A-63A
电池输入标准配置:2个电池输入,100A空气开关
额定输入满负荷时效率≥90%
保护功能的标准配置;一次掉电负载(5路),两次掉电负荷(1路),可以根据用户需求配置第一和第二掉电负载电路的数量
底盘尺寸和重量
组合柜1700mm*600mm*600
分体柜整流柜900*600*600
电池柜900*600*600
组合柜的完整配置大于200kg,不包括电池组
分体柜整装整流柜>130kg蓄电池柜70kg
随着运营商基站数量的增加,其网络能耗也在迅速增加。随着环保理念的深入,土地收购变得越来越困难,土地租赁成本也飙升。随着劳动力成本的增加,通信设备必须提高人机友好性,以降低工程安装和日常维护成本。为了满足用户全面降低TCO的要求,中兴通讯开发了ZXDU68S301系列高效电源。
产品特点
ZXDU68 S301是一款高效-48V室内组合动力系统,标准配置18kW。
包含更多样的外部接口:输入和输出干触点、RJ45、RS232、RS485、USB,并可根据现场环境灵活联网。
该系统采用了效率高达96%的整流器,比传统电源更节能,减少了二氧化碳排放。
功率密度更高,设计用于前接线前的维护,可配备4组电池,减少了占地空间和维护空间。
监控单元采用彩色屏幕,视觉效果更好,同时采用人性化九宫格设计,操作更方便。
功率密度高,节省高达50%的占地面积,减少80~300VAC的场地租赁费用,输入电压范围宽,电池寿命提高-40~+70℃的工作温度范围,现场适应性强,节省温控设备成本,使用速率整流器,与传统电源相比,可节省高达10%的电力。丰富的网络接口可以提供干触点、RJ45、RS232和RS485,并支持USB接口快速启动和监控存储容量扩展。规格参数:
产品版本号:zxdu68 b201
整流器:zxd3000,配置4台
监测单元:CSU500a
输入方式:单相双输入,手动切换
可变输入电压范围:80 V至300 V
输入电压频率:50 Hz/60 Hz
输入电流:72a
(2) 热力设计技术
对于室外电源,如果采用集成机柜,电源和电池隔间都需要进行散热和加热处理,机柜内部的温度控制已成为技术难点。高低温控制技术是一项复杂的技术。高温控制可以使用空调、热交换器或风扇,而低温控制则使用加热器等技术。然而,空调、热交换器和加热器的电源是一个主要问题。一般来说,直流供电的空调和加热器设备相对较少,使用交流电源。在交流停电或其他交流故障的情况下,空调和加热器无法正常工作,机柜内的温度偏离电池的正常工作温度,从而影响电池的使用寿命。目前行业的趋势是,供电隔间通常配备直流供电的热交换器或风扇进行散热,使用交流供电的加热管进行加热;电池舱采用风扇冷却和加热膜加热来控制电池舱的温度。

ZTE ZXDU68W201 Communication Power Supply ZTE Outdoor 48v200A Outdoor 5G Base Station Power Supply
AC distribution three-phase five wire system (L1/L2/L3/N/PE)
Rated input voltage line voltage 380VAC, phase voltage 220VAC
Voltage range 45hz-66hz
Input current 100A
Input power factor ≥ 0.99 Full load
Two and one auxiliary outputs at home are single-phase three hole 16A maintenance sockets; The other one is a single-phase 33A AC auxiliary output, mainly supplying power to the heater of the heat exchanger and the battery heating plate
DC distribution -42vdc~-58vdc adjustable
Output current 200A full configuration
Load output: 6 channels, each with a capacity of 6A-63A
Standard configuration for battery input: 2 battery inputs, 100A air switch
Efficiency ≥ 90% at rated input full load
Standard configuration of protection functions; Once powered off load (5 circuits), twice powered off load (1 circuit), the number of first and second powered off load circuits can be configured according to user needs
Chassis size and weight
Combination cabinet 1700mm * 600mm * 600
Split cabinet rectifier cabinet 900 * 600 * 600
Battery cabinet 900 * 600 * 600
The full configuration of the combined cabinet is greater than 200kg, excluding the battery pack
Split cabinet full configuration rectifier cabinet > 130kg battery cabinet 70kg
With the increase in the number of base stations for operators, their network energy consumption is rapidly increasing. The acquisition of sites has become increasingly difficult with the deepening of environmental protection concepts, and the cost of land leasing has also skyrocketed. With the increasing cost of labor, communication equipment must improve human-machine friendliness to reduce engineering installation and daily maintenance costs. To meet the requirements of users to comprehensively reduce TCO, ZTE has developed the ZXDU68S301 series of high-efficiency power supplies.
Product characteristics
ZXDU68 S301 is a high-efficiency -48V indoor combination power system with a standard configuration of 18kW.
Contains more diverse external interfaces: input and output dry contacts, RJ45, RS232, RS485, USB, and can be flexibly networked according to the on-site environment.
The system adopts a rectifier with an efficiency of up to 96%, which is more energy-efficient than traditional power sources and reduces CO2 emissions.
Higher power density, designed for maintenance before front wiring, and can be equipped with 4 sets of batteries, reducing floor space and maintenance space.
The monitoring unit adopts a color screen for better visual effect, while using a humanized nine palace grid design for more convenient operation.
High power density, saving up to 50% of floor space, reducing site rental expenses by 80~300VAC, wide input voltage range, improving battery life -40~+70 ℃ working temperature range, stronger adaptability in the field, saving cost of temperature control equipment, using rate rectifiers, saving up to 10% electricity compared to traditional power sources. Rich network interfaces can provide dry contacts, RJ45, RS232, and RS485, And it supports USB interface for quick start and monitoring storage capacity expansion. Specification parameters:
Product version number: zxdu68 b201
Rectifier: zxd3000, configured with 4 units
Monitoring unit: CSU500a
Input mode: single-phase dual input, manual switching
Fluctuatible input voltage range: 80 V to 300 V
Input voltage frequency: 50 Hz/60 Hz
Input current: 72a
(2) Thermal design technology
For outdoor power supply, if an integrated cabinet is adopted, both the power and battery compartments need to undergo heat dissipation and heating treatment, and temperature control inside the cabinet has become a technical difficulty. High and low temperature control technology is a complex technology. High temperature control can use air conditioning, heat exchangers, or fans, while low temperature control uses technologies such as heaters. However, the power supply of air conditioning, heat exchangers, and heaters is a major issue. Generally speaking, there are relatively few DC powered air conditioning and heater equipment, and AC power supply is used. In the event of an AC power outage or other AC faults, the air conditioning and heater cannot function properly, and the temperature inside the cabinet deviates from the normal working temperature of the battery, which affects the service life of the battery. The current trend in the industry is that the power supply compartment is generally equipped with DC powered heat exchangers or fans for heat dissipation, and AC powered heating tubes are used for heating; The battery compartment adopts fan cooling and heating film heating to control the temperature of the battery compartment.


电话直呼
在线客服
在线留言
发送邮件
联系我们:
18611994737
客服1
点击这里给我发消息
还可输入字符250(限制字符250)
技术支持: 建站ABC | 管理登录
×
seo seo