华为ACDB220-32-10B室外交流配电箱
(1) 交流负载
安装ACDB交流输入电缆。
支撑线直径为1.5mm2~16mm2。
图6-37安装交流输入线(接ACDB220-63-12B)
图6-38安装交流输入电缆(接DJN1000-S)
将电缆的一端连接到ACDB220-63-12B或DJN1000-S交流输出接口。
将电缆的另一端连接到ACDB交流输入接口。
不要将ACDB220-32-10B交流输入电缆直接连接到逆变器DJN3000和DJN5000-H。必须通过ACDB220-63-12B进行连接。
安装完所有电缆后,用密封泥密封电缆孔。








(1) AC load
Install the ACDB AC input cable.
The diameter of the support line is 1.5mm2~16mm2.
Figure 6-37 Installing AC Input Line (Connected to ACDB220-63-12B)
Figure 6-38 Installing AC Input Cable (Connected to DJN1000-S)
Connect one end of the cable to the ACDB220-63-12B or DJN1000-S AC output interface.
Connect the other end of the cable to the ACDB AC input interface.
Do not directly connect the ACDB220-32-10B AC input cable to the inverters DJN3000 and DJN5000-H. Connection must be made through ACDB220-63-12B.
After installing all cables, seal the cable holes with sealing mud.