18611994737

首页 >> 产品中心 >>华为室外柜 >> 华为ICC710-HD1-C1室外柜,前后开门设计,通信电源,一体化通信电源室外柜
详细说明

华为ICC710-HD1-C1室外柜,前后开门设计,通信电源,一体化通信电源室外柜

暂无价格
  • 产品说明
  • 产品参数

华为ICC710-HD1-C1室外柜,前后开门设计,通信电源,一体化通信电源室外柜

ICC710-HD1-C1技术规范
项目
解释
室外机柜
温度控制:
设备隔间:热交换,散热150W/K(当温度在40-45℃和太阳辐射之间时,热交换散热降低到110W/K)
蓄电池室:直接通风
外形尺寸(高×宽×深:1925mm×900mm×1120mm
底座尺寸(高×宽×深:150mm×900mm×950mm
重量:300kg
安装方式:落地安装
维护方式:前端维护
接线方式:自下而上
工作温度
-10℃至+40℃(使用TCB-C电池时,温度范围:-10℃至+45℃)
解释:
当温度低于-5℃时,可能会出现电池温度过低警报,影响电池的备份性能。
运输温度
–40℃~+70℃
储存温度
–40℃~+70℃
工作湿度
5%相对湿度至95%相对湿度(无冷凝)
海拔高度要求
0m~4000m(在2000m~4000m的高温降额环境下,每增加200m,运行温度下降1℃)
噪声水平
符合GR487的要求,噪声压力≤65dBA@1.5m(环境温度为45℃时)
防护等级和工作环境
IP55,C级环境
其他要求
无导电粉尘和腐蚀性气体,无爆炸危险
灰尘水平、腐蚀性物质、有害生物、霉菌和其他指标应符合ETSI EN 300 019-1-4(V2.2.1)4.1级的要求
8 ICC710-HD1-C1的内部结构(前部)
(1) RTN+铜排
(2) 热交换
(3) 风扇箱
(4) 接线板
(5) DCDU-400AN2型
(6) -48V铜排
(7) 电池安装空间
图3-9 ICC710-HD1-C1的内部结构(背面)
(1) 接地棒


ICC710-HD1-C1 Technical Specification
project
explain
Outdoor cabinet
Temperature control:
Equipment compartment: heat exchange, heat dissipation 150W/K (when the temperature is between 40-45 ℃ and solar radiation, the heat exchange heat dissipation decreases to 110W/K)
Battery room: direct ventilation
Overall dimensions (height × wide × Depth: 1925mm × 900mm × 1120mm
Base size (height × wide × Depth: 150mm × 900mm × 950mm
Weight: 300kg
Installation method: floor mounted
Maintenance method: front-end maintenance
Wiring method: bottom-up
working temperature
-10 ℃ to+40 ℃ (when using TCB-C batteries, temperature range: -10 ℃ to+45 ℃)
Explanation:
When the temperature is below -5 ℃, a low battery temperature alarm may occur, affecting the backup performance of the battery.
Transportation temperature
–40℃~+70℃
Storage temperature
–40℃~+70℃
Working humidity
5% relative humidity to 95% relative humidity (non condensing)
Altitude requirements
0m~4000m (in a high temperature derating environment of 2000m~4000m, for every 200m increase, the operating temperature decreases by 1 ℃)
noise level
Meet the requirements of GR487, with noise pressure ≤ 65dBA@1.5m (When the ambient temperature is 45 ℃)
Protection level and working environment
IP55, Class C environment
Other requirements
No conductive dust and corrosive gases, no explosion hazard
Dust levels, corrosive substances, harmful organisms, molds, and other indicators should meet the requirements of ETSI EN 300 019-1-4 (V2.2.1) level 4.1
Internal structure of 8 ICC710-HD1-C1 (front)
(1) RTN+copper bar
(2) Heat exchange
(3) Fan box
(4) Terminal block
(5) DCDU-400AN2 type
(6) -48V copper bar
(7) Battery installation space
Figure 3-9 Internal Structure of ICC710-HD1-C1 (Back)
(1) Grounding rod

电话直呼
在线客服
在线留言
发送邮件
联系我们:
18611994737
客服1
点击这里给我发消息
还可输入字符250(限制字符250)
技术支持: 建站ABC | 管理登录
×
seo seo