华为MTS9510A-HT2102室外电源柜,通信电源,室外一体化定义机柜
简介





除了电池电压、电流和温度等基本参数外,MTS9000A智能电池管理系统还可以实时监测电池的SOC和SOH状态
(SOH:健康状态,SOC:充电状态),通过收集这些参数,MTS9000A智能电池管理系统
它可以提供电池备份时间警报和过时的机组更换警报等功能,以延长电池组的寿命,避免现场异常停电。
MTS9000A智能电池管理系统的拓扑结构如下图所示:
客户价值
MTS9000A多能输入输出系统
MTS9000A系统支持多种标准的能量输入和输出,以增强系统对现场环境和各种电气设备的适应性
适用性。MTS9000A支持多种能源的集成,包括市政电力、石油发动机、太阳能和高压直流电。通过系统改造,它可以
输出各种格式,包括-48V DC、220V AC、高压DC远程电源等。
支持多种能量输入,使站点更易于访问
一体化监控单元,高效可靠
简化网络建设计划,简化备件管理
4路太阳能输入配电箱R4850G2整流器
(>96% )
S4850G1太阳能电源模块
全面的电池信息管理,延长电池组寿命,降低硬件更换成本
智能系统控制,提高系统供电可靠性
远程电池诊断,降低现场调查成本
3814626457.jpg
MTS9000A智能配电装置
MTS9000A智能配电单元E型熔断器主要实现智能配电功能,提供智能容量配置、远程通电和断电,以及过电流和短路保护
功能,并监测和指示功率输出状态;提供RS485串行通信和故障报警报告功能。E-fuse启用站点配置
电力管理更方便、更高效。其主要功能如下:
综合保护:防过电压/欠电压、防过电流/欠电压,防反向连接
支持热插拔
支持容量的远程编程
支持远程电流测量
支持远程开机和关机操作
客户收入
全面保护,高可靠性
可远程控制和编程,易于管理
可见负载功耗,可管理上下功率,节能高效
主要参数
部分
智能配电装置
参数
尺寸442mm*42mm*300mm(宽*高*深)
10个配电回路,最大20A/路(可设置5,10,15,20A)
SPD差模:10kA,共模:20kA;8/20μs
工作电压40~60VDC
大电流100A
MTS9000A现场能源效率管理
SIEE公司=
电子线路
E F+E G+E R
通常,无线基站的能耗占整个网络的40%到60%
例如,提高无线基站的能效水平对控制整个网络的能耗成本有影响
意义重大。华为MTS9000A支持测量站能效和
提供改进建议,帮助客户降低运营和维护成本。
散热设备消耗
热量消耗
监测单元功耗
另外
E L:通信主要设备消耗
能量
E R E G E F公司
现场能源效率定义
无线基站
45%-60%
传输网络、中央计算机室
以及其他
40%-55%
现场能源效率管理计划
现场能源效率介绍(SIEE)
(SIEE:现场基础设施能效)
华为新一代通信能源解决方案MTS9000A支持交流输入和太阳能输入功率统计,并支持直流配电侧主要设备的功耗
控制器根据实时收集的运行参数的独立统计,计算站点的实时能效水平,并将结果报告给网络管理系统(NetEco)。网络管理
该系统可以按不同维度统计显示现场能效数据,实现现场能效水平的统计分析,并提供管理改进帮助。因此,就整体而言
提供用于提高网络能效水平的测量工具。
可见站点能源效率
华为MTS9000A内置测量功能,可测量能源系统的能量传输
测量输入和输出,并上传到NetEco,NetEco可以
根据t对单站和整个网络的能源效率进行统计分析
brief introduction
In addition to basic parameters such as battery voltage, current, and temperature, the MTS9000A intelligent battery management system can also monitor the SOC&SOH status of the battery in real-time
(SOH: State of Health, SOC: State of Charge), through the collection of these parameters, the MTS9000A intelligent battery management system
It can provide functions such as battery backup time alarm and outdated unit replacement alarm to extend the battery pack life and avoid abnormal power outage at the site.
The topology structure of the MTS9000A intelligent battery management system is shown in the following figure:
Customer Value
MTS9000A multi energy input and output system
The MTS9000A system supports multiple standard inputs and outputs of energy to enhance the system's adaptability to the site environment and various electrical equipment
Applicability. The MTS9000A supports the integration of multiple energy sources, including municipal electricity, oil engines, solar energy, and high-voltage direct current. Through system transformation, it can
Output in various formats, including -48V DC, 220V AC, high-voltage DC remote supply, etc.
Supports multiple energy inputs, making the site easier to access
Integrated monitoring and control unit, efficient and reliable
Simplify network construction plan and simplify spare parts management
4-way solar input distribution box R4850G2 rectifier
(>96% )
S4850G1 solar power supply module
Comprehensive battery information management, extending battery pack life and reducing hardware replacement costs
Intelligent system control to improve system power supply reliability
Remote battery diagnosis to reduce on-site survey costs
3814626457.jpg
MTS9000A Intelligent Distribution Unit
The MTS9000A intelligent power distribution unit E-fuse mainly implements intelligent power distribution functions, providing intelligent capacity configuration, remote power on and off, as well as overcurrent and short circuit protection
Function, and monitor and indicate the power output status; Provide RS485 serial communication and fault alarm reporting function. E-fuse enables the configuration of the site
Electricity management is more convenient and efficient. Its main functions are as follows:
Comprehensive protection: anti overvoltage/undervoltage, anti overcurrent/undervoltage, anti reverse connection
Support for hot swapping
Support for remote programming of capacity
Support remote current measurement
Support remote power on and off operations
Customer revenue
Comprehensive protection and high reliability
Remote controllable and programmable, easy to manage
Visible load power consumption, manageable up and down power, energy-saving and efficient
main parameter
parts
Intelligent power distribution unit
parameter
Size 442mm * 42mm * 300mm (W * H * D)
10 power distribution circuits, with a maximum of 20A/route (5,10,15,20A can be set)
SPD differential mode: 10kA, common mode: 20kA; 8/20 μ s
Working voltage 40~60VDC
High current 100A
MTS9000A Site Energy Efficiency Management
SIEE=
E L
E F +E G +E R
Usually, the energy consumption of wireless base stations accounts for 40% to 60% of the entire network
For example, improving the energy efficiency level of wireless base stations has an impact on controlling the energy consumption cost of the entire network
Meaning is significant. Huawei MTS9000A supports measuring station energy efficiency and
Provide improvement suggestions to help customers reduce operation and maintenance costs.
Heat dissipation equipment consumption
Heat consumption
Monitoring unit power consumption
other
E L: Consumption of communication main equipment
energy
E R E G E F
Site Energy Efficiency Definition
Wireless base station
45%-60%
Transmission network, central computer room
And others
40%-55%
Site Energy Efficiency Management Plan
Introduction to Site Energy Efficiency (SIEE)
(SIEE: Site Infrastructure Energy Efficiency)
Huawei's new generation communication energy solution MTS9000A supports AC input and solar input power statistics, as well as supporting the power consumption of main equipment on the DC distribution side
Based on independent statistics of real-time collected operating parameters, the controller calculates the real-time energy efficiency level of the site and reports the results to the network management system (NetEco). Network management
The system can statistically display site energy efficiency data by different dimensions, achieve statistical analysis of site energy efficiency levels, and provide management improvement assistance. Thus, for the whole
Provide measurement tools for improving network energy efficiency levels.
Visible site energy efficiency
Huawei MTS9000A has a built-in measurement function to measure the energy transmission of the energy system
Measure input and output, and upload to NetEco, NetEco can
Conduct statistical analysis on the energy efficiency of a single station and the entire network according to customer customized requirements.
Site energy efficiency can be improved
Based on site energy efficiency reports and solution analysis, Huawei can provide customers with
Provide rich and effective energy solution improvement suggestions for households to achieve reduction
The purpose of reducing overall network energy consumption, such as adopting more efficient rectification modules,
Cabinet thermal analysis, air duct design, configuration scheme optimization, and other contents.