18611994737

首页 >> 产品中心 >>华为室外柜 >> 华为TP48150C-N06C3室外壁挂电源系统,通信电源室外电源柜
详细说明

华为TP48150C-N06C3室外壁挂电源系统,通信电源室外电源柜

暂无价格
  • 产品说明
  • 产品参数

华为TP48150C-N06C3室外壁挂电源系统,通信电源室外电源柜

华为ETP48150系统简介
ETP48150系统是一种使用48V/50A整流器模块的通信电源系统。该产品提供稳定可靠的直流电源。使用三个整流模块,电力系统的最大容量可以达到150A。
该系列产品是根据IEEE、NEMA、ANSI和Bellcore等标准设计的。出口1535695536325.jpg
华为ETP48150系统功能
1.系统具有N+1备份容量
2.输入电压范围宽(90~300Vac,其中90~175Vac用于线性功率降低)
3.模块工作温度范围宽(-5℃~+75℃,其中45℃~75℃用于线性降功率)
4.模块化精密设计,易于扩展。
5.具有热插拔功能,可在不影响操作的情况下更换模块
6.重量轻,整流器模块重量仅2.0公斤
7.高功率密度
8.高功率因数(PF>0.99)
9.高效模块(额定输出54Vdc,效率≥91%)
10.配备阀门控制的电池浮动电压和温度补偿
11.先进的负载均流技术,具有优异的均流特性
12.通过RS-232通信端口实现智能三远程功能
13.可以安装低压隔离开关,以保护电池免受过度放电
14.高密度交直流配电设备
15.系统具有良好的低输入电压启动功能
16.智能油机管理功能(可选)
导出1535695539410.jpg
华为ETP48150系统架构
该系统提供48V/150A的最大容量,并配有可选的低压隔离保护。
系统分支配置如下:
额定交流输入:220Vac,单相三线制
交流输入开关:63A×1回(单相三线制)
交流分流器(客户预留):16A×2路(单相)
负载下的电气支路:100A×1路,40A×3路(空气开关)
电池保护支路:32A×2路,16A×4路(空气开关)
低压隔离开关:LVDS×2路(如上所述,负载隔离保护和电池隔离保护)
蓄电池分流器:100A×2路(空气开关)
油机管理功能:可选
外部尺寸和重量:
尺寸(mm):483(宽)×340(深)×222(高)
重量(kg):约20 kg(不包括模块)出口1535695542821jpg
4华为ETP48150系统技术指标
4.1华为ETP48150系统配置
该系统提供48V/150A的最大容量和5U的高度。直流配电设计位于系统上方,具有可选的低压隔离保护。
4.2华为ETP48150系统功能
当整流器模块并联运行时,负载电流以相同的百分比共享,预期电流(I1)和实际共享电流(I2)之间的差值保持在整流器模块额定输出电流(I)的±5%以内。
出口1535695546100.jpg
4.3华为ETP48150工作环境
(1) 工作环境温度:-5~45℃(线性功率下降输出为45℃~75℃)
(2) 相对湿度:0-95%(非冷凝)
(3) 海拔高度:<4000m(注:2000m~3000m时,功率每增加100m下降1%);
在3000m~4000m处,每增加100m功率下降2%
4.4华为ETP48150整流模块规格
(1) 功率:2880W
(2) 效率:≥91%
(3) 交流输入
(a) 频率:45Hz~66Hz
(b) 电压:220Vac(单相);
176Vac~300Vac(满载);90Vac~175Vac(线性降低功率输出)
(c) 功率因数:>0.99(输入电压220V,输出电压54V,满载输出)。
(4) 直流输出
(a) 电压:
标称电压:54.0 V
浮充电压:浮充电压为42Vdc~58Vdc(可调)
平均充电电压:平均充电电压值可满足现场应用特性的需要,由电池制造商确定
约定的平均充电电压值的设置;一般设置如下:平均充电电压为50Vdc~58Vdc(可调),出厂设置为56.4Vdc;
(b) 电流:当单个整流器模块的输出容量为54.0V时为50A。
(5) 冲击电流:21.8A(冷启动)
(6) 慢速启动时间是指输出电压从10%上升到90%的时间,不少于3秒。
(7) EMI(电磁接口):通过CISPR22 A级。
(8) 保护
(a) 输入过电压保护
(b) 输入低电压保护
(c) 输出过电压保护
(d) 输出过电流短路保护
(e) 输出限流保护
(f) 超温保护
4.5华为ETP48150系统控制与监控单元(CSU)
系统的监控单元具有以下显示和功能:
(1) 清除故障报警显示。
(2) 争议


Supply Huawei communication power supply ETP48150
Introduction to Huawei ETP48150 System
The ETP48150 system is a communication power supply system that uses a 48V/50A rectifier module. This product provides stable and reliable DC power supply. Using three rectifier modules, the maximum capacity of the power system can reach 150A.
This series of products is designed according to standards such as IEEE, NEMA, ANSI, and Bellcore. Export 1535695536325.jpg
Huawei ETP48150 system features
1. The system has N+1 backup capacity
2. Wide input voltage range (90~300Vac, of which 90~175Vac is used for linear power reduction)
3. Wide operating temperature range of the module (-5 ℃~+75 ℃, of which 45 ℃~75 ℃ is used for linear power reduction)
4. Modular precision design, easy to expand.
5. With hot swapping function, the module can be replaced without affecting operation
6. Lightweight, the rectifier module weighs only 2.0 kilograms
7. High power density
8. High power factor (PF>0.99)
9. Efficient module (rated output 54Vdc, efficiency ≥ 91%)
10. Equipped with valve controlled battery float voltage and temperature compensation
11. Advanced load current sharing technology with excellent current sharing characteristics
12. Implement intelligent three remote functions through RS-232 communication port
13. Low voltage isolation switches can be installed to protect the battery from excessive discharge
14. High density AC/DC distribution equipment
15. The system has good low input voltage startup function
16. Intelligent oil engine management function (optional)
Export 1535695539410.jpg
Huawei ETP48150 System Architecture
The system provides a maximum capacity of 48V/150A and is equipped with optional low-voltage isolation protection.
The system branch configuration is as follows:
Rated AC input: 220Vac, single-phase three-wire system
AC input switch: 63A × 1 circuit (single-phase three wire system)
AC diverter (reserved by customer): 16A × 2-way (single-phase)
Electrical branch under load: 100A × 1 circuit, 40A × 3-way (air switch)
Battery protection branch: 32A × 2-way, 16A × 4-way (air switch)
Low voltage isolation switch: LVDS × 2-way (load isolation protection and battery isolation protection, as described above)
Battery diverter: 100A × 2-way (air switch)
Oil engine management function: optional
External dimensions and weight:
Size (mm): 483 (width) × 340 (deep) × 222 (high)
Weight (kg): approximately 20 kg (excluding modules) Export 1535695542821jpg
4 Huawei ETP48150 System Technical Indicators
4.1 Huawei ETP48150 System Configuration
The system provides a maximum capacity of 48V/150A and a height of 5U. The DC distribution design is located above the system, with an optional low-voltage isolation protection.
4.2 Huawei ETP48150 system functions
When the rectifier modules operate in parallel, the load current is shared at the same percentage, and the difference between the expected current (I1) and the actual shared current (I2) is maintained within ± 5% of the rated output current (I) of the rectifier module.
Export 1535695546100.jpg
4.3 Huawei ETP48150 Work Environment
(1) Working environment temperature: -5~45 ℃ (linear power reduction output is 45 ℃~75 ℃)
(2) Relative humidity: 0-95% (non condensing)
(3) Altitude: < 4000m (note: when 2000m~3000m, the power decreases by 1% for every 100m increase);
At 3000m~4000m, the power decreases by 2% for every 100m increase
4.4 Huawei ETP48150 Rectifier Module Specifications
(1) Power: 2880W
(2) Efficiency: ≥ 91%
(3) AC input
(a) Frequency: 45Hz~66Hz
(b) Voltage: 220Vac (single-phase);
176Vac~300Vac (full load); 90Vac~175Vac (linearly reducing power output)
(c) Power factor:>0.99 (input voltage 220V, output voltage 54V, full load output).
(4) DC output
(a) Voltage:
Nominal voltage: 54.0 V
Float charging voltage: Float charging voltage is 42Vdc~58Vdc (adjustable)
Average charging voltage: The average charging voltage value can meet the needs of on-site application characteristics and is determined by the battery manufacturer
The setting of the agreed average charging voltage value; The general settings are as follows: the average charging voltage is 50Vdc~58Vdc (adjustable), and the factory setting is 56.4Vdc;
(b) Current: 50A when the output capacity of a single rectifier module is 54.0V.
(5) Impulse current: 21.8A (cold start)
(6) The slow start time refers to the time when the output voltage rises from 10% to 90%, not less than 3 seconds.
(7) EMI (Electromagnetic Interface): Through CISPR22 Class A.
(8) Protection
(a) Input overvoltage protection
(b) Input low voltage protection
(c) Output overvoltage protection
(d) Output overcurrent short circuit protection
(e) Output current limiting protection
(f) Over temperature protection
4.5 Huawei ETP48150 System Control and Monitoring Unit (CSU)
The monitoring unit of the system has the following displays and functions:
(1) Clear the fault alarm display.
(2) Disputes

华为TP48150C-N06C3室外壁挂电源系统,通信电源室外电源柜

华为ETP48150系统简介
ETP48150系统是一种使用48V/50A整流器模块的通信电源系统。该产品提供稳定可靠的直流电源。使用三个整流模块,电力系统的最大容量可以达到150A。
该系列产品是根据IEEE、NEMA、ANSI和Bellcore等标准设计的。出口1535695536325.jpg
华为ETP48150系统功能
1.系统具有N+1备份容量
2.输入电压范围宽(90~300Vac,其中90~175Vac用于线性功率降低)
3.模块工作温度范围宽(-5℃~+75℃,其中45℃~75℃用于线性降功率)
4.模块化精密设计,易于扩展。
5.具有热插拔功能,可在不影响操作的情况下更换模块
6.重量轻,整流器模块重量仅2.0公斤
7.高功率密度
8.高功率因数(PF>0.99)
9.高效模块(额定输出54Vdc,效率≥91%)
10.配备阀门控制的电池浮动电压和温度补偿
11.先进的负载均流技术,具有优异的均流特性
12.通过RS-232通信端口实现智能三远程功能
13.可以安装低压隔离开关,以保护电池免受过度放电
14.高密度交直流配电设备
15.系统具有良好的低输入电压启动功能
16.智能油机管理功能(可选)
导出1535695539410.jpg
华为ETP48150系统架构
该系统提供48V/150A的最大容量,并配有可选的低压隔离保护。
系统分支配置如下:
额定交流输入:220Vac,单相三线制
交流输入开关:63A×1回(单相三线制)
交流分流器(客户预留):16A×2路(单相)
负载下的电气支路:100A×1路,40A×3路(空气开关)
电池保护支路:32A×2路,16A×4路(空气开关)
低压隔离开关:LVDS×2路(如上所述,负载隔离保护和电池隔离保护)
蓄电池分流器:100A×2路(空气开关)
油机管理功能:可选
外部尺寸和重量:
尺寸(mm):483(宽)×340(深)×222(高)
重量(kg):约20 kg(不包括模块)出口1535695542821jpg
4华为ETP48150系统技术指标
4.1华为ETP48150系统配置
该系统提供48V/150A的最大容量和5U的高度。直流配电设计位于系统上方,具有可选的低压隔离保护。
4.2华为ETP48150系统功能
当整流器模块并联运行时,负载电流以相同的百分比共享,预期电流(I1)和实际共享电流(I2)之间的差值保持在整流器模块额定输出电流(I)的±5%以内。
出口1535695546100.jpg
4.3华为ETP48150工作环境
(1) 工作环境温度:-5~45℃(线性功率下降输出为45℃~75℃)
(2) 相对湿度:0-95%(非冷凝)
(3) 海拔高度:<4000m(注:2000m~3000m时,功率每增加100m下降1%);
在3000m~4000m处,每增加100m功率下降2%
4.4华为ETP48150整流模块规格
(1) 功率:2880W
(2) 效率:≥91%
(3) 交流输入
(a) 频率:45Hz~66Hz
(b) 电压:220Vac(单相);
176Vac~300Vac(满载);90Vac~175Vac(线性降低功率输出)
(c) 功率因数:>0.99(输入电压220V,输出电压54V,满载输出)。
(4) 直流输出
(a) 电压:
标称电压:54.0 V
浮充电压:浮充电压为42Vdc~58Vdc(可调)
平均充电电压:平均充电电压值可满足现场应用特性的需要,由电池制造商确定
约定的平均充电电压值的设置;一般设置如下:平均充电电压为50Vdc~58Vdc(可调),出厂设置为56.4Vdc;
(b) 电流:当单个整流器模块的输出容量为54.0V时为50A。
(5) 冲击电流:21.8A(冷启动)
(6) 慢速启动时间是指输出电压从10%上升到90%的时间,不少于3秒。
(7) EMI(电磁接口):通过CISPR22 A级。
(8) 保护
(a) 输入过电压保护
(b) 输入低电压保护
(c) 输出过电压保护
(d) 输出过电流短路保护
(e) 输出限流保护
(f) 超温保护
4.5华为ETP48150系统控制与监控单元(CSU)
系统的监控单元具有以下显示和功能:
(1) 清除故障报警显示。
(2) 争议

Supply Huawei communication power supply ETP48150
Introduction to Huawei ETP48150 System
The ETP48150 system is a communication power supply system that uses a 48V/50A rectifier module. This product provides stable and reliable DC power supply. Using three rectifier modules, the maximum capacity of the power system can reach 150A.
This series of products is designed according to standards such as IEEE, NEMA, ANSI, and Bellcore. Export 1535695536325.jpg
Huawei ETP48150 system features
1. The system has N+1 backup capacity
2. Wide input voltage range (90~300Vac, of which 90~175Vac is used for linear power reduction)
3. Wide operating temperature range of the module (-5 ℃~+75 ℃, of which 45 ℃~75 ℃ is used for linear power reduction)
4. Modular precision design, easy to expand.
5. With hot swapping function, the module can be replaced without affecting operation
6. Lightweight, the rectifier module weighs only 2.0 kilograms
7. High power density
8. High power factor (PF>0.99)
9. Efficient module (rated output 54Vdc, efficiency ≥ 91%)
10. Equipped with valve controlled battery float voltage and temperature compensation
11. Advanced load current sharing technology with excellent current sharing characteristics
12. Implement intelligent three remote functions through RS-232 communication port
13. Low voltage isolation switches can be installed to protect the battery from excessive discharge
14. High density AC/DC distribution equipment
15. The system has good low input voltage startup function
16. Intelligent oil engine management function (optional)
Export 1535695539410.jpg
Huawei ETP48150 System Architecture
The system provides a maximum capacity of 48V/150A and is equipped with optional low-voltage isolation protection.
The system branch configuration is as follows:
Rated AC input: 220Vac, single-phase three-wire system
AC input switch: 63A × 1 circuit (single-phase three wire system)
AC diverter (reserved by customer): 16A × 2-way (single-phase)
Electrical branch under load: 100A × 1 circuit, 40A × 3-way (air switch)
Battery protection branch: 32A × 2-way, 16A × 4-way (air switch)
Low voltage isolation switch: LVDS × 2-way (load isolation protection and battery isolation protection, as described above)
Battery diverter: 100A × 2-way (air switch)
Oil engine management function: optional
External dimensions and weight:
Size (mm): 483 (width) × 340 (deep) × 222 (high)
Weight (kg): approximately 20 kg (excluding modules) Export 1535695542821jpg
4 Huawei ETP48150 System Technical Indicators
4.1 Huawei ETP48150 System Configuration
The system provides a maximum capacity of 48V/150A and a height of 5U. The DC distribution design is located above the system, with an optional low-voltage isolation protection.
4.2 Huawei ETP48150 system functions
When the rectifier modules operate in parallel, the load current is shared at the same percentage, and the difference between the expected current (I1) and the actual shared current (I2) is maintained within ± 5% of the rated output current (I) of the rectifier module.
Export 1535695546100.jpg
4.3 Huawei ETP48150 Work Environment
(1) Working environment temperature: -5~45 ℃ (linear power reduction output is 45 ℃~75 ℃)
(2) Relative humidity: 0-95% (non condensing)
(3) Altitude: < 4000m (note: when 2000m~3000m, the power decreases by 1% for every 100m increase);
At 3000m~4000m, the power decreases by 2% for every 100m increase
4.4 Huawei ETP48150 Rectifier Module Specifications
(1) Power: 2880W
(2) Efficiency: ≥ 91%
(3) AC input
(a) Frequency: 45Hz~66Hz
(b) Voltage: 220Vac (single-phase);
176Vac~300Vac (full load); 90Vac~175Vac (linearly reducing power output)
(c) Power factor:>0.99 (input voltage 220V, output voltage 54V, full load output).
(4) DC output
(a) Voltage:
Nominal voltage: 54.0 V
Float charging voltage: Float charging voltage is 42Vdc~58Vdc (adjustable)
Average charging voltage: The average charging voltage value can meet the needs of on-site application characteristics and is determined by the battery manufacturer
The setting of the agreed average charging voltage value; The general settings are as follows: the average charging voltage is 50Vdc~58Vdc (adjustable), and the factory setting is 56.4Vdc;
(b) Current: 50A when the output capacity of a single rectifier module is 54.0V.
(5) Impulse current: 21.8A (cold start)
(6) The slow start time refers to the time when the output voltage rises from 10% to 90%, not less than 3 seconds.
(7) EMI (Electromagnetic Interface): Through CISPR22 Class A.
(8) Protection
(a) Input overvoltage protection
(b) Input low voltage protection
(c) Output overvoltage protection
(d) Output overcurrent short circuit protection
(e) Output current limiting protection
(f) Over temperature protection
4.5 Huawei ETP48150 System Control and Monitoring Unit (CSU)
The monitoring unit of the system has the following displays and functions:
(1) Clear the fault alarm display.
(2) Disputes


电话直呼
在线客服
在线留言
发送邮件
联系我们:
18611994737
客服1
点击这里给我发消息
还可输入字符250(限制字符250)
技术支持: 建站ABC | 管理登录
×
seo seo