全新原包 华为OMB室外壁挂电源
尺寸(mm):600(高)x240(宽)x430(深)温度规格:无太阳辐射:-20℃~+50℃
华为OMB户外5G壁挂式通信电源传输机柜、华为OMB室外机柜、华为5G通信电源
产品介绍
华为OMB户外机柜分为交流和直流两类。下面,我将配置一些内部参数。
交流柜内部介绍
① OMB交流柜、②HEUA、③内循环风扇、④外循环风扇、⑤交直流电源设备、⑥PMU模块、⑦交流防雷箱
① OMB直流柜、②HEUA、③内循环风机、④外循环风机,⑤DCDU-03B、⑥接线槽
华为OMB户外5G通信电源传输柜
安装指南
华为OMB户外机柜可分为两种类型
① 金属桅杆安装
② 壁挂式安装
OMB直流机柜的安装方法与OMB交流机柜的安装方式相同。接地线和信号线不应绑在一起或缠绕在一起,并应保持一定距离,以减少相互干扰。
安装要求
① 为确保人身和设备安全,在安装、操作和维护设备时,请遵守设备上标记和手册中描述的所有安全预防措施。手册中的“安全警告”、“注意事项”和“说明”并不代表应遵循的所有安全注意事项,而只是对所有安全注意措施的补充。
② 负责安装和维护华为设备的人员在安装、操作和维护设备之前,必须经过严格的培训,掌握正确的操作方法和安全注意事项。
③ 高压电源为设备的运行提供电源。通过潮湿物体与高压电源直接接触或间接接触可能造成致命危险。不规范和不正确的高压操作可能导致火灾和触电等事故。禁止在雷雨天气下进行高压和交流电力作业,以及塔架和桅杆作业,否则可能有生命危险。在将设备连接到电源之前,必须先接地,否则可能危及人身和设备安全。操作电源时,必须首先切断电源,禁止带电操作。
④ 高强度射频信号对人体健康有害。在装有多个发射天线的铁塔或桅杆上进行近端安装、维护和其他操作时,应首先联系相关人员关闭发射天线。在进行光纤操作时,禁止用肉眼接近或直接看出口。为防止钻井过程中粉尘进入人体呼吸道或落入眼睛,作业人员应采取相应的防护措施。在高处作业时,要注意防止物体坠落。
⑤ 在操作设备之前,对需要接地的设备进行电气连接检查,以确保其可靠接地。人体产生的静电会损坏单板上的静电敏感元件,如大规模集成电路(LSI)。请确保在操作过程中采取正确的ESD保护措施,如佩戴防静电腕带或防静电手套,以避免对板、模块或电子元件造成静电损坏。







Size (mm): 600 (H) x 240 (W) x 430 (D) Temperature specification: No solar radiation: -20 ℃~+50 ℃
Huawei OMB outdoor 5G wall mounted communication power transmission cabinet, Huawei OMB outdoor cabinet, Huawei 5G communication power supply
Product Introduction
Huawei OMB outdoor cabinets are divided into two categories: AC and DC. Below, I will configure some internal parameters.
Internal Introduction to AC Cabinet
① OMB AC cabinet, ② HEUA, ③ internal circulation fan, ④ external circulation fan, ⑤ AC/DC power supply equipment, ⑥ PMU module, ⑦ AC lightning protection box
① OMB DC cabinet, ② HEUA, ③ Internal circulation fan, ④ External circulation fan, ⑤ DCDU-03B, ⑥ Wiring slot
Huawei OMB Outdoor 5G Communication Power Transmission Cabinet
Installation Guide
Huawei OMB outdoor cabinets can be divided into two types
① Metal mast installation
② Wall mounted installation
The installation method of OMB DC cabinet is the same as that of OMB AC cabinet. The grounding wire and signal wire should not be tied together or intertwined, and a distance should be maintained to reduce mutual interference.
Installation requirements
① To ensure personal and equipment safety, when installing, operating, and maintaining equipment, please follow all safety precautions marked on the equipment and described in the manual. The "safety warnings", "precautions", and "instructions" in the manual do not represent all safety precautions that should be followed, but only serve as a supplement to all safety precautions.
② Personnel responsible for installing and maintaining Huawei equipment must undergo strict training and master the correct operating methods and safety precautions before installing, operating, and maintaining the equipment.
③ High voltage power supply provides power for the operation of equipment. Direct contact or indirect contact with high voltage power supply through damp objects can pose a fatal danger. Unstandardized and incorrect high-voltage operation can cause accidents such as fires and electric shocks. It is prohibited to carry out high-voltage and AC power operations, as well as tower and mast operations in thunderstorm weather, otherwise there may be a danger to life. Before connecting the equipment to the power supply, it must be grounded first, otherwise it may endanger personal and equipment safety. When operating the power supply, it is necessary to first cut off the power supply and prohibit live operation.
④ High intensity RF signals are harmful to human health. When performing near end installation, maintenance, and other operations on an iron tower or mast equipped with multiple transmission antennas, relevant personnel should be contacted first to turn off the transmission antenna. When conducting fiber optic operations, it is prohibited to approach or directly look at the light outlet with naked eyes. To prevent dust from entering the human respiratory tract or falling into the eyes during drilling, operators should take corresponding protective measures. When working at heights, pay attention to preventing objects from falling.
⑤ Before operating the equipment, conduct electrical connection checks on the equipment that needs to be grounded to ensure that it is reliably grounded. The static electricity generated by the human body can damage the static sensitive components on the single board, such as large-scale integrated circuits (LSI). Please ensure the correct ESD protection measures during operation, such as wearing an anti-static wrist strap or anti-static gloves, to avoid static damage to the boards, modules, or electronic components.