中兴ZXDU68S301直流开关电源48V300A技术参数
ZXDU68 s301直流电源系统应用于室内环境,可为移动通信基站、室内覆盖站、传输、微波、地面卫星等通信设备提供稳定的直流电源。1.交流输入采用三相五线制(L1/L2/L3/N/PE),额定交流输入电压220V。2.直流输出额定电压为-48V,可在-42V至-58V之间连续调节。3.配备6台ZXDU2400(50ah)整流器,额定容量可达300A。4.集成机柜内置电池仓,集交流配电、直流配电、整流、监控于一体。中兴S301系统与电池集成,采用室内-48V直流供电系统,配备6台ZXD2400(50A)整流器,全容量300A,三相交流输入,输入电压范围宽(相电压80V~300V)。内置电池仓的集成机柜,可在机柜内安装电池(每个4*12V),集成交流配电、直流配电、整流、监控和蓄电池。
T301.5.jpg
ZXDU68S301系统:内置2层电池仓ZXDU68T301系统:内置1层电池仓、整流器和监控单元,支持热插拔。具备全面的监控和管理功能
中兴ZXDU68 S301通信电源系统1能源管理:支持自动节能、临时不节能、非节能。1.电池管理:支持温度补偿、充电限流、自动循环均衡、自动循环测试。1.电源管理:支持自动二次掉电保护和手动掉电控制。1.管理:支持系统状态查询、报警查询、历史记录查询。1报警提示:支持声音报警、灯光报警、干触点报警、通讯报警。
支持RS232、RS485、IP、干触点等多种监控组网方式。支持前端接线方式,方便电缆安装和维护。ZXDU68S301是一款-48V室内组合电源系统,标准配置最高可达18kW。包含更多样的外部接口:输入和输出干触点、RJ45、RS232、RS485、USB,并可根据现场环境灵活联网。该系统采用了效率高达96%的整流器,比传统电源更节能,减少了二氧化碳排放。功率密度更高,设计用于前接线前的维护,可配备4组电池,减少了占地空间和维护空间。
3867696418.jpg
监控单元采用彩色屏幕,视觉效果更好,同时采用人性化九宫格设计,操作更方便。
ZXD2400整流器ZXD2400整流器实现了系统的交直流转换,其电气特性如下:交流输入电压:单向三线制(L/N/PE);交流输入电压:额定电压200v,开孔范围80V-300v;输出电流:额定输出50a;直流输出电压:额定输出48v,42-58v,连续可调。用户体验高功率密度,节省高达50%的占地面积,在宽输入电压范围内减少80~300VAC的场地租赁费用,提高电池使用寿命-40~+70℃的工作温度范围,在现场具有更强的适应性,节省了温控设备的成本,并采用了整流器,
与传统电源相比,它可以节省高达10%的电力。丰富的网络接口可以提供干触点、RJ45、RS232和RS485,并支持USB接口,用于快速启动和监控存储容量扩展。ZXDU68 S301的机械参数为2000mm*600mm*600mm。技术规范:工作温度-5℃至+45℃,良好+15℃至+25℃,储存温度-40℃至+70℃,相对湿度10%至90%,无冷凝,良好40%至60%的现场要求:无导电粉尘,无腐蚀性气体,无强电磁场干扰,无爆炸危险,无湍流,地板倾角≤5°交流配电交流输入方式三相五线制(L1/L2/L3LN/PE)交流输入电压额定相电压220v,波动相电压范围80v-300v,频率50Hz/60Hz




ZTE ZXDU68S301 DC Switching Power Supply 48V300A Technical Parameters
The ZXDU68 s301 DC power supply system is applied in indoor environments and can provide stable DC power for mobile communication base stations, indoor coverage stations, transmission, microwave, ground satellites and other communication equipment. 1. The AC input adopts a three-phase five wire system (L1/L2/L3/N/PE), with a rated AC input voltage of 220V. 2. The DC output rated voltage is -48V, continuously adjustable from -42V to -58V. 3. The rated capacity can reach 300A when equipped with 6 ZXDU2400 (50ah) rectifiers. 4. The integrated cabinet is equipped with a built-in battery compartment, which integrates AC distribution, DC distribution, rectification, and monitoring, Integrated with battery, ZTE S301 system features an indoor -48V DC power supply system, equipped with 6 ZXD2400 (50A) rectifiers with a full capacity of 300A, three-phase AC input, and a wide input voltage range (phase voltage 80V~300V). Integrated cabinet with built-in battery compartment, capable of installing batteries (4 * 12V each) inside the cabinet, integrating AC power distribution, DC power distribution, rectification, monitoring, and storage batteries.
T301.5.jpg
ZXDU68S301 system: built-in 2-layer battery compartment ZXDU68T301 system: built-in 1-layer battery compartment, rectifier, and monitoring unit support hot swapping. Equipped with comprehensive monitoring and management functions
ZTE ZXDU68 S301 Communication Power System 1 Energy Management: Supports automatic energy-saving, temporary non energy-saving, and non energy-saving. 1. Battery management: supports temperature compensation, charging current limiting, automatic cycle equalization, and automatic cycle testing. 1. Power management: supports automatic secondary power down protection and manual power down control. 1. Management: Support system status query, alarm query, and historical record query. 1 alarm prompt: supports sound alarm, light alarm, dry contact alarm, and communication alarm.
Support multiple monitoring networking methods such as RS232, RS485, IP, and dry contacts. Support front wiring method, convenient cable installation and maintenance. ZXDU68S301 is a -48V indoor combination power system with a standard configuration of up to 18kW. Contains more diverse external interfaces: input and output dry contacts, RJ45, RS232, RS485, USB, and can be flexibly networked according to the on-site environment. The system adopts a rectifier with an efficiency of up to 96%, which is more energy-efficient than traditional power sources and reduces CO2 emissions. Higher power density, designed for maintenance before front wiring, and can be equipped with 4 sets of batteries, reducing floor space and maintenance space.
3867696418.jpg
The monitoring unit adopts a color screen for better visual effect, while using a humanized nine palace grid design for more convenient operation.
The ZXD2400 rectifier zxd2400 rectifier achieves AC-DC conversion of the system, and its electrical characteristics are as follows: AC input voltage: unidirectional three wire (L/N/PE); AC input voltage: rated voltage 200v, hole breaking range 80V-300v; output current: rated output 50a; DC output voltage: rated output 48v, 42-58v, continuously adjustable. The user experience high power density, saving up to 50% of the floor space, Reduce site rental expenses by 80~300VAC with a wide input voltage range, improve battery service life by -40~+70 ℃ working temperature range, and have stronger adaptability in the field, saving on the cost of temperature control equipment and adopting a rectifier,
Compared to traditional power sources, it can save up to 10% of electricity. Rich network interfaces can provide dry contacts, RJ45, RS232, and RS485, and support USB interface for quick start and monitoring storage capacity expansion. ZXDU68 S301 has mechanical parameters of 2000mm * 600mm * 600mm. Technical specifications: working temperature -5 ℃ to+45 ℃, good+15 ℃ to+25 ℃, storage temperature -40 ℃ to+70 ℃, relative humidity of 10% to 90%, no condensation, good 40% to 60% of the site requirements: no conductive dust, no corrosive gases, No strong electromagnetic field interference, no explosion hazard, no turbulence, floor inclination ≤ 5 ° AC distribution AC input mode three-phase five wire system (L1/L2/L3LN/PE) AC input voltage rated phase voltage 220v, fluctuating phase voltage range 80v-300v, frequency 50Hz/60Hz